We make a volumetric Christmas tree out of paper with our own hands

On the eve of the New Year, the manufacture of Christmas trees with their own hands becomes relevant. Volumetric Christmas trees made of colored paper will perfectly decorate the apartment. Such a creative gift will be a pleasant surprise, especially if it is made together with children.

It will be very exciting to make such a Christmas tree with children

Such Christmas trees will perfectly decorate the apartment on a festive night

Before the New Year, it is very popular to make Christmas trees from paper.

How to make a bulk Christmas tree from corrugated paper

To make the craft, you will need green corrugated paper, PVA glue, green cardboard, scissors, a toothpick.

Before starting to make Christmas trees, you should prepare the main tool for rolling paper “rolls”. To do this, the toothpick is cut off at the edges. On one side, form a small incision with a knife, slightly dividing it in half.

It’s not difficult to make such a Christmas tree

To create such a Christmas tree, prepare paper, glue and scissors

Steps for making a Christmas tree

Draw a large circle on a cardboard with a compass. Next cut it. This will be the basis of the future Christmas tree.

1. In order to collapse the cone from the resulting circle, it should be connected in half and cut along the bend. To form a cone from the obtained semicircle. Glue the junction of the edge of the cone with its base. Wait a few minutes to give the glue a good hold on the cardboard and dry.
2. For the manufacture of strips for quilling, corrugated paper of green color is taken, and segments of a width of 1.5 centimeters are applied on it.
3. On the resulting tapes along the entire length, make frequent cuts, not reaching the edge. So it turns out the fringe of the needles for the tree.
4. To perform the main element of paper rolling, a spiral, one end of the strip is inserted into the forked part of the toothpick and a piece of paper is wound along the entire length of the toothpick. In this case, it is better to twist the toothpick itself, and not the tape. To get the same elements, try to twist evenly and gently.
5. To prevent the curled paper roll from unwinding, the free end adheres to the base. Allow the glue to dry.
6. After all the elements are made, to give them the correct volume, you need to carefully fluff the chopped fringe on them.
7. Glue the prepared paper rolls onto the cone. It is better to start doing it from the top of the cone. To do this, the pointed end is lubricated with glue and an element is put on it.
8. Press the part. Next, glue the entire cone with fluffy spirals.

The Christmas tree will look brighter if it is decorated with bows and balls of corrugated paper. To do this, you can roll multi-colored balls or squares from it, connected in half, tied in the middle with a thread. Glue Christmas tree decorations.

Such Christmas trees will create a festive atmosphere in the apartment

To make the tree look beautiful, decorate it with bows

To make a Christmas tree, you can use the instructions

Quilling Christmas tree

The quilling Christmas tree will become a beautiful and original decoration of a holiday card.

To make a Christmas tree, you need A4 colored paper, scissors, a toothpick, PVA glue, a Christmas tree base (it can be colored cardboard or a postcard)

To make the Christmas tree look more creative, for the manufacture of paper spirals, you can take colored paper in green, but in different shades. Roll up 4-5 elements of each color.

• On colored paper, draw strips 3-5 mm wide, cut.
• Next, with the help of a toothpick, begin the production of paper rolls. To do this, insert one edge into the incision made with a knife on a toothpick and twist it evenly. Instead of a toothpick, you can use wooden skewers for barbecue or a regular rod. Then you can wind up just in the middle of the selected tool.
• So that the resulting spiral is free, it is better to let it go. When it blooms a little on the table, fasten to the selected diameter.
• For a more interesting Christmas tree, the basics of spirals can be twisted in different diameters.
• Laying out Christmas trees on cardboard is best to start from above, taking the smallest element. Glue in the form of a cone did everything. It is possible in an uneven order.
• The Christmas tree can be decorated with ornaments in the form of twisted spirals of very small diameter or beads.

For the manufacture of spirals, you can use colored paper

Quilling Christmas tree will become a beautiful and original decoration of a holiday card

Christmas tree made of cardboard cylinder from toilet paper

Unconventional decoration of the New Year’s room may be Christmas tree pendants made of cardboard sleeve from toilet paper. Such holiday symbols can be hung as individual elements of the decor, and a garland.

For decoration you will need:

• cardboard, inner part of toilet paper;
• emerald or green acrylic;
• bright ribbon;
• flat details for decoration. it can be buttons, pastes;
• glue (“crystal moment” is perfect for gluing plastic, its transparent texture will be invisible, plus it dries instantly).
• scissors.

When everything you need is prepared, you can begin to prepare the decoration.

Christmas trees made by yourself will perfectly decorate the apartment

Such Christmas trees can be hung on the ceiling or Christmas tree.

Creating a Christmas tree in this way is a little easier.

First, the roll should be painted with paint in several layers and allowed to dry well. This may take up to half an hour.

In order to make a spiral out of a roll, it is necessary, starting from above, to cut it in a single line to the bottom of a width of 1.5 cm. The ends will be pointed.

In order to give the tree the correct shape, you should twist the cut strip into a coil. To fix the shape, put the resulting spiral under a heavy object, for example, a stack of books, for 30-60 minutes.

A little untwist the future Christmas tree, and on the outside, glue the cooked round elements that will imitate the balls. You can arrange them both in a chaotic order, and according to a certain algorithm.

Glue a bright thin ribbon to the top of the craft. It can be a red ribbon for decorating flowers or even a thick thread, yarn.

If you follow the recommendations, the Christmas tree will turn out very beautiful

Creating a Christmas tree yourself is not difficult

Japanese paper Christmas tree

For crafts, you can take either special Japanese paper or glossy cardboard in bright colors.

You will also need: wrapping paper (sheets of a magazine with a bright image), A4 white sheet, skewers, pencil, scissors, ruler, PVA glue.

For the base of the tree, cut a regular sheet of paper into strips 2 cm wide. Twist all the strips into circles. Attach all the elements to each other in a circle with glue. It should make a big circle of spirals. The width of the circle is arbitrary. The wider - the more stable the figure will be.

Cut two rectangles 21 by 28 cm from cardboard. Bend each of them with an accordion so that the sides are 1.5 cm wide. Round the ends of the accordion.

Fold the part in half by gluing it back to back. A semicircle forms

Glue the resulting semicircles to each other so that a circle is obtained. This will be the bottom row of tree branches. You can replace the glue with wire by piercing both semicircles and twisting its ends.

Make rectangles in two pieces of the following sizes: 18 by 28, 16 by 28, 14 by 26, 12 by 26, 8 by 25, 6 by 23.

Make harmonica from all the rectangles, connect the same semicircles in 6 circles.

Now you need to cook the skewers. They need to be wrapped. To do this, you will have to cut a strip a few centimeters wide from a bright sheet, and wrap it in a spiral.

Put on the skewer all the circles made branches. Bottom should be wider circles.

Herringbone is a very beautiful decorative element.

Own Christmas tree perfectly complement the festive atmosphere

To create such a Christmas tree, glossy paper or cardboard is suitable

Origami Christmas tree

It is very simple and quick to make a Christmas tree made of green paper using the origami technique. Mastering the art will be happy not only for children but also for adults. This technique is attractive because it can be made from anywhere in the world without additional tools at hand.

You will need colored green paper and scissors.

Instruction manual

• Make a square out of paper.
• First connect in half by swiping your finger along the bend. Then unfold and bend in half diagonally, on both sides. Expand. Get a square with highlighted stripes.
• Collapse by received preliminary bends, as shown in the figure.
• Bend each side to the middle.
• Expand the resulting bend so that a pocket is obtained, and connect the edge of the pocket with the center.
• Turn the corners of the Christmas tree to the outside, then turn them inward.
• The Christmas tree will have 8 equal faces, which must be cut along the edges horizontally in 4 places.
• Bend the incised sides down diagonally.
• Bend the previous bend and, along the line received, tuck into the Christmas tree.
• The crown can be flashed with a thread, making it a Christmas toy or pendant to decorate the interior.

Such a Christmas tree can be made quickly and easily.

Such a Christmas tree can be made without additional funds.

Paper Christmas Tree

Many mothers prefer to make gifts for grandparents not only with their own hands, but also begin to instill a craving for creativity in their babies. Young children will be interested in doing such a Christmas tree themselves.

For crafts, you need multi-colored colored paper, scissors, a sheet of cardboard.

Children 3-4 years old will be able to make blanks from strips on their own. For younger children, mom can pre-cook them.

• Cut colored paper into even ribbons of the same width (1-1.5 cm), but of different lengths.
• Glue the blanks with glue and glue on the cardboard in the shape of a herringbone. From below horizontally arrange longer segments, gradually shortening their length to the top of the tree.

It’s very easy to make such Christmas trees

Such a Christmas tree will be a great decoration for a Christmas tree or apartment.

You can attract children to create a Christmas tree

Volumetric Christmas tree made of old paper

To create a New Year's beauty, you can use various improvised means. A product from sheets of old paper or magazines will look especially interesting.

Such a Christmas tree will look unusual

Own Christmas tree will perfectly decorate the interior

A quick and easy way to make such a Christmas decoration item

• Take 2 magazines, glue PVA.
• Fold each sheet into 2 parts. Bend the protruding edge. Get half the tree.
• For the second half, perform the same procedure with the second journal.
• Glue both halves to get a finished Christmas tree. You can make the base by gluing a few wine corks from the bottom.

To make the Christmas tree look more creative, you can spray it around the edges with spray paint.

Video: How to make a Christmas tree out of paper with your own hands

50 photos of ideas for creating a Christmas tree from paper with your own hands: